What style roller do I have and what are the part numbers for it? |
| What do you do when the exhaust blows in the operator’s face? |
| What do you do if your chain falls off? |
| Do I have seat options? |
What are the articulation components? |
What Oil to Use and Where? |
| |
: The roller was built before May 1999. When sitting on the machine, the engine is located on the right hand side.
Cover: VRC
Chain Guard: SA-7168
Brake Assembly: SA-7805O
: The roller was produced in May 1999 through current. When sitting on the machine, the engine is located on the left side.
Cover: VRC-2
Chain Guard: SA-7168N
Brake Assembly: SA-7805
-Top of Page |
| |
|
| |
The machine you are using is an Old style. You can purchase a new deck, chain guard and coupling guard. Dismount the engine and transmission and remount them on the new deck. It should solve the problem.
-Top of Page |
| |
|
| |
Check all sprockets and verify that teeth are pointed, not rounded. If rounded, replace sprockets. If sprockets are fine, loosen setscrews on drive sprocket located on the transmission shaft. Push sprocket toward transmission causing the chain to be in an angled position. Put transmission shifter in neutral and push machine forward and backward. The drive sprocket will self-align. Lock in setscrews and chain should be in alignment with all sprockets. If it is still falling off, replace chain as it is probably elongated. The problem should be solved.
Parts discussed:
Drive Sprocket: MS-7167 (15 teeth)
High Speed: MS-7167-A (24 teeth)
Chain: SA-7173
High Speed: SA-7173A
Idler Arm Complete: SA-7126-7
Idler Arm Spring: MS-7128
Idler Arm Bolt: MS-7021
Idler Arm Nut: MS-7029
Driven Sprocket (96 tooth): SA-7303
-Top of Page |
| |
|
| |
A standard farm seat (SA-7707) comes on the machine when it is purchased. An optional outdoor vinyl, adjustable, cushioned seat with mounting plate is available for purchase (SA-9301).
-Top of Page |
| |
|
| |
The front mounting bracket (SA-7501) includes pressed in bushings that are reamed to accept attaching pin (SA-7713). The yolk assembly looks like the letter “Y” (SA-7709) which attaches to the rear (tandem frame assembly: SA-7706).
-Top of Page |
| |
|
The Engine and Gear Box use 10W30 Weight oil
The Transmission uses 30 weight NON DETURGENT Oil |
